Resetting the ‘Lube Belt’ Message on Your Horizon Treadmill. Is your Horizon treadmill displaying the ‘Lube Belt’ message, and you’re wondering how to reset it? Fear not, as we’ve got you covered. Follow these simple steps to clear the message on different Horizon treadmill models. Fix lube belt message on a treadmill. Once the lubricant is applied, plug the treadmill back in, power it on, and follow the manufacturer’s recommended procedure for resetting the ‘Lube Belt’ message.

For the Horizon T101, T202, and T303 Models:

1. Simultaneously hold down the Speed up (+) button and the Stop button for 5-7 seconds.

For the Horizon 7.0AT and Older Versions of the 7.4AT:

1. Simultaneously hold down the Speed up button on the console near the middle dial and the Stop button for 5-7 seconds.

For Horizon 7.4AT-04 Treadmills:

If your treadmill falls under this category, follow these steps:

1. Ensure your console has the latest software update.
2. Hold Speed Key 12 and the Stop button simultaneously for 5 seconds to clear the ‘Lube Belt’ message.

For 7.4AT-04 Treadmills Updated to Software Version 4.006 or Newer:

If you have the updated software, do the following:

1. Hold the Media Play/Pause key and the Stop button simultaneously for 5 seconds to clear the message.

For the Horizon 7.8AT Model:

1. Simultaneously hold down the Play/Pause button and the Stop button for 5-7 seconds.

These steps should help you reset the ‘Lube Belt’ message on your Horizon treadmill. Regular maintenance and lubrication of your treadmill belt are essential to keep it running smoothly and prolong its lifespan. If you encounter any issues or need further assistance, don’t hesitate to reach out to the manufacturer or a professional technician for guidance.

Video how to reset the lube belt message:

If everything fails you can also try to master reset your Horizon Treadmill, take a look at this video:

When faced with the ‘Lube Belt’ message on your treadmill, it’s important to address it promptly and correctly to ensure the longevity and optimal performance of your machine. First and foremost, make sure to refer to your treadmill’s user manual for specific instructions tailored to your model, as different treadmill brands and models may have varying reset procedures. In most cases, though, the ‘Lube Belt’ message is a reminder to lubricate the treadmill belt to reduce friction and wear.

Troubleshooting the “Lube Belt” message

If you are unable to clear the “Lube Belt” message on the console, there are a few things you can try:

User error

Make sure you are following the correct steps to reset the Lube Belt message. To do this, press and hold Speed + first, then STOP, and hold both buttons for 5-7 seconds. If the issue persists, complete a Master Reset. Exception: For the 7.8AT, press and hold the red stop button and the play/pause media button at the same time for a few seconds.

Faulty keypad or poor connection

Check the keypad ribbon cable connection. If the cable is loose or damaged, it will need to be repaired or replaced. You can also run a keypad test to check for any other problems with the keypad.

Faulty upper control board

If you have tried all of the above steps and the Lube Belt message is still not clearing, it is possible that the upper control board is faulty. In this case, you will need to contact Horizon Fitness customer support for assistance.

How to perform a Master Reset

A Master Reset should only be done if you are unable to remove the “Lube Belt” message using any other method. Performing a Master Reset will erase all workouts, programs, time, and distance data. You can perform a Master Reset at any time; you do not need to wait until the “Lube Belt” message displays.

To perform a Master Reset, follow these steps:

1. Keep the safety key in place and hold Incline + and Speed – at the same time to enter the engineering menu. Exception: On newer 7.0AT, 7.4AT, and 7.8AT treadmills where the central overlay buttons control media, instead hold down the highest incline and speed quick keys to enter the engineering menu.
2. Toggle into ENG3 (switch function) and press ENTER.
3. Hold Incline + and Speed – until ENG8 (test) appears. Exception: On newer 7.0AT, 7.4AT, and 7.8AT treadmills where the central overlay buttons control media, instead hold down the highest incline and speed quick keys.
4. Follow the instructions for your console:
   • Press ENTER until P3 (clear) appears on the screen. Some older consoles may have the clear function under P2.
   • For the 7.0AT, 7.4AT, and 7.8AT console, press ENTER to change “Normal” to “No Clear”. Hold START for a few seconds to change “No Clear” to “Clear”. Press ENTER to change “Clear” to “Press Start to ERP”.
5. Hold START for about 5 seconds. This will start the Master Reset and all data will be cleared. If you have reset the console correctly, the console will beep twice. The screen will black out after 10 seconds.
6. Exit by holding STOP, or by removing the safety key. The screen will light up and be ready to go.

If you are still having trouble clearing the “Lube Belt” message after following all of the above steps, please contact Horizon Fitness customer support for assistance.

Still need a hand? Book a treadmill repair with our Brisbane service team.

If your treadmill needs more than a lube, it might be time to upgrade. Browse our full range of treadmills for sale in Brisbane — new, used and commercial models in stock at Mr Treadmill Geebung.

Need a treadmill while yours is being serviced? Try our treadmill hire Brisbane service — from $16/week with delivery across South East Queensland.